The following materials and processes used at Seastrom Manufacturing Co., Inc. have been classified as Non-Compliant in accordance with the European Union Directive 2015/863/EU (RoHS). This Directive, however, does not affect the use of parts in applications outside of the Directive’s specified countries.
Non-Compliant Process/Finish
| Process/Finish: |
Denoted @ end of part # as: |
| • Chemical Film Finish |
— CF |
| • Hexavalent Chromium Finish |
— CHR |
| • Cadmium |
— C1, - C2 |
| • Chrome |
— CHR |
| • 60/40 Tin Lead Finish |
— TL1, - TL2 |
| • Zinc Plate, Type II (Yellow) |
— Z2 |
| • Chromatic Anodize, Type I |
— A1 |
| • Standard Electroless Nickel Plating (can be RoHS compliant if specified by customer on order) |
|
Non-Compliant Materials:
| • 2011 Aluminum Rod (primarily used in shoulder washers, spacers, and washers with thin side walls.) For Aluminum parts, please contact Seastrom at info@seastrom-mfg.com to see if Aluminum 2011 is used for a specified part. |
Sincerly,
Seastrom Manufacturing Co., Inc. is Certified ISO 9001:2000 and AS9100:2004
Any Seastrom part number produced by Seastrom Manufacturing Co., Inc. that meets the following conditions is classified as compliant in accordance with European Union Directive 2015/863/EU (RoHS).
Material:
Any of the materials listed below without a process/finish.
Non-Metals:
| Delrin (Acetal) |
Mylar |
PTFE |
| Epoxy Glass (Fiberglass) |
Neoprene |
PVC (Polyvinyl Chloride) |
| Fluorocarbon (Viton) |
Nitrile (Buna-N) |
Santoprene |
| Fluorosilicone |
Nylatron |
Silicone |
| Kapton |
Nylon |
Vulcanized Fibre |
| KEL-F (PCTFE) |
Phenolic |
|
| Mica |
Polyethylene |
|
| Metals: |
|
|
| Brass |
Copper |
Beryllium Copper |
| Phosphorus Bronze |
Cold Rolled Steel |
Spring Steel |
| Stainless Steel |
Steel |
Titanium |
The following base materials contain > 0.1% lead, but are exempt under note 6 of the Directive’s Annex:
- 12L14 Steel (0.35% of weight max)
- C - 360 Brass Rod (3.7% of weight max)
Process/Finish:
Any Seastrom part number produced with a process/finish listed below is compliant under the Directive, unless the base material is Aluminum. (Contact Seastrom for Aluminum part status)
| Compliant Process/Finish: |
Denoted @ end of part # as: |
| • Less Finish |
— LF |
| • Sulfuric Anodize, Type II |
— A2 |
| • Hard Anodize, Type III |
— A3 |
| • Black Oxide |
— BO |
| • Phosphate |
— PH |
| • Electrolytic Nickel Plate |
— N |
| • Silver Plate |
— S |
| • Tin Plate |
— T1 |
| • Tin Dip |
— T2 |
| • Zinc Plate, Type I (Blue) |
— Z1 |
| • Zinc Plate, Type III (Clear) |
— Z3 |
| • Passivate |
— P |
Designated Electroless Nickel Plating (RoHS Compliance must be requested by customer) Sincerly,
Seastrom Manufacturing Co., Inc. is Certified ISO 9001:2015 and AS9100 Rev. D